News

What problems should be paid attention to in automatic screw packing machine

2021-02-05  571

The automatic screw packing machine is evolved from the traditional packing machine. The photoelectric system is applied to the packing machine. The optical signal is converted into electrical signal, which is controlled by PLC system. The pneumatic device is used to achieve very accurate counting. The error of 100 screws per package is 01000, the error of each package is 1, and the power consumption is 1 / 200 of the traditional pneumatic device. Applied to hardware, furniture, counting machine, toys, medicine and other industries. It can meet the requirements of users.

When using the automatic screw packing machine, we should pay attention to some problems in order to operate the automatic packing machine and make it work normally.

1. Before starting the machine, please carefully check whether all parts of the automatic packaging machine are in good condition and whether the screws are loose. If there is any problem, please solve it in time.

2. Be sure to clean the feeder and metering machine, the products are sanitary.

3. After starting the machine, set the temperature of the temperature controller on the man-machine interface and put on the packaging film.

4. Adjust the effect of bag making and coding, and start to make packaging bags and supply materials.

5. Check the sealing condition of the packaging bag, and make sure it is completely sealed.

6. In the production process, the packaging quality of products should be checked from time to time. If problems are found, the work of the packaging machine should be stopped in time.

7. Use the packer correctly. When the packer is in operation, do not use your hands to debug all parts. This is very dangerous. Pay attention to safety, safety is important

8. If you find that there is a problem with the packaging machine, please stop running immediately and check and deal with it in time. After the problem is solved, the packaging machine can be started.

9. Check the running direction of the conveyor belt to ensure that the conveyor belt runs in the normal direction